Toshiba Magnia 3030 - Manual (Page 53)

Getting Started
Connecting Peripheral Devices
35
Connecting Peripheral Devices
There are I/O connectors for connecting peripheral devices such as a keyboard,
mouse, display and so on on the back of the server. Properly connect the
peripheral devices to the I/O connectors before turning on the server.
Connect peripheral devices to the server according to the following procedure.
1 Make sure that all the power switches of the server and external units are
turned off.
2 If the power cables of the server and external units are connected to an AC
outlet, pull the plug of the power cable out of the AC outlet.
3 Connect each of the peripheral devices to a proper connector on the server
with an interface cable.
Connecting peripheral devices
4 If a connector is provided with thumbscrews for securing connection,
tighten the screws.
5 After making sure that all the peripheral units are properly connected, plug
the power cables of the server and peripheral units into AC outlets.