Toshiba Magnia 3030 User Manual
Page 151
System Configuration Setup
BIOS Setup Utility
133
Select whether the
off.
→ (Keyboard Group) NumLock
Key Click: Disabled
Selection of “Enabled” generates a click sound when the key is pressed.
Keyboard auto-repeat rate: 30/sec
Enter the auto-repeat time for the keyboard.
→ (Keyboard Group) Typematic Speed
Keyboard auto-repeat delay: 1/2sec
Enter the auto-repeat delay time for the keyboard.
→ (Keyboard Group) Typematic Delay
Processor Settings
Displays information on the mounted processor.
Processor Speed Setting
Displays/sets the operating frequency of the CPU. Setting with this utility is
invalid.
Processor POST Speed Setting
The operating frequency of the CPU which has been detected during self-
diagnosis is set. This setting cannot be changed.
Processor Retest: No
Set this item to “Yes” to conduct CPU diagnostic tests in initial diagnosis
during the next start of the server. Once the tests have been conducted, the
setting returns to “No” automatically. Set this item to “Yes” after CPU mod-
ule has been added or replaced.
Processor Serial Number: Disabled
Set whether the function corresponding to the serial number of the proces-
sor is to be made valid (“Enabled”) or invalid (“Disabled”). To change the
setting from “Disabled” to “Enabled”, the setting must be cleared using the
hardware setup switch. See “Appendix C: Switch Setting” on page 217.
Memory Cache: Enabled
Set whether the cache memory is to be made valid (“Enabled”) or invalid
(“Disabled”).
Processor 1 CPU ID/Processor 1 L2 Cache Size
Processor 2 CPU ID/Processor 2 L2 Cache Size
Displays the CPU ID and cache size of the mounted CPU.
Language
Set the language to be used for system BIOS. Do not change the setting.