Toshiba Magnia 3030 - Manual (Page 50)

Getting Started
Maintenance 32
Maintenance
Maintenance of the server
If the outside of the server has been dirty or stained, wipe it out with soft cloth.
If it is severely dirty, moisten soft cloth with water and lightly wipe out dirt with
it.
If benzine, thinner or the like is used for cleaning or a chemical such as an
insecticide is applied onto the surface, the server may be deformed or
discolored.
It is recommended to keep the packing case for transport of the server in the
future.
Don’t apply a strong shock or vibration to the server. If it is dropped on the floor
or knocked against anything, it may cause a failure or malfunction of the server.
Maintenance of the keyboard
If dust has accumulated in crevices in the keyboard, it may cause malfunction
of the keyboard. Clean the keyboard according to the following procedure.
1 Shut down the server to cut off the power supply to the keyboard.
2 Absorb dust out of crevices between keys with a vacuum cleaner.
3 Clean every key with soft cloth so as to wipe out dirt.
NOTE: Be very careful not to spill liquid on the keyboard.
Maintenance of the mouse
If the mouse is used without cleaning for a long time, the mouse pointer is slow
to move on the screen or it does not move in spite of mouse operation because
the mouse gets dust on the ball.
Clean the mouse according to the following procedure.
1 Shut down the server to cut off the power supply to the mouse.
2 Turn the ball lock dial on the bottom of the mouse in the direction of the
arrow (counterclockwise) to detach it from the mouse and then remove the
ball.