Toshiba Magnia 3030 - Manual (Page 63)

Getting Started
Setup of Disk Array (RAID)
45
Setup of Disk Array (RAID)
When a RAID controller is installed in the system after purchase or it is built in
the server before delivery, it is required to set the disk array (RAID).
When “Simple setup” is selected from the “Selection of RAID configuration”
during execution of the “Setup” of the Toshiba Server Setup Tool, the RAID
controller utilities have no need of operation because the RAID is configured by
minimum setting in this case. When “Detailed setup” or “No setup” is selected
or the RAID is to be configured without use of the Toshiba Server Setup Tool, it
is required to set up the RAID.
See “RAID Controller User’s Guide”
If the operating system (OS) is installed in the server which a RAID controller
is additionally built in, be sure to install the Power Console that is a RAID
monitor and control utility and the Service after installation of the OS (for
Windows NT/2000).
NOTE: When installing the Windows NT/2000 by the Toshiba Server Setup
Tool, the Power Console and Service can be automatically installed after
installation of the Windows NT/2000.
For installation with the Toshiba Server Setup Tool:
See “Toshiba Server Setup Tool User’s Guide”
Installing Software
After the system is completely set up, install the OS (operating system), the
accessory software of the automatic shutdown function and server monitor
function (LAN Desk Server Manager) supplied with the server and the RAID
controller software.
The server is provided with the following programs as the standard accessories.
™ Automatic shutdown function (contained in the Toshiba Server Setup Tool
CD-ROM)
The driver to use the automatic shutdown function on the Windows NT.
See “(6) System status indicators” on page 14.
™ EMP (Emergency Management Port) console application (contained in the
Toshiba Server Setup Tool CD-ROM)
The software for the client for using the EMP function.
When “Simplified installation of Windows NT 4.0/2000” is selected on the
Toshiba Server Setup Tool and some item is selected from “Setup of Service/