Toshiba Magnia 3030 - Manual (Page 71)

53
Installing and
Removing Hardware
Methods to install and remove optional devices are explained in this chapter.
Installing and Removing Optional Devices
Install any optional device before setting up the server.
Before starting operation
WARNING: When installing an optional device, be sure to use Toshiba’s genu-
ine parts or recommended parts.
If any other device is used, it may cause a breakout of fire.
About details of optional devices, consult an authorized Magnia service pro-
vider.
Don’t touch any part irrelevant to the installation work.
Since there are many high tension parts, it may cause an electric shock.
Be very careful not to drop removed screws in the equipment through installa-
tion work of a peripheral unit according to the instructions.
Tightly fasten every screw. If a screw drops inside the equipment, it may cause
a fire or smoke.
CAUTION: When installing/removing an optional device, put on gloves without
fail.
Gloves protect your hands from getting hurt, because there are many sharp-
pointed or -edged projections on the board of an option and inside of the
server.