Toshiba Magnia 3030 - Manual (Page 87)

Installing and Removing Hardware
CPU Module
69
Pulling out the termination board
8 Connect the fan cable on the mother board, then push in the CPU as far as it
will go.
The fan cable of a standard CPU module is connected to J9C1 on the
mother board.
The fan cable of an extended CPU module should be connected to J9A3 on
the mother board.
Inserting the CPU module
NOTE: A standard CPU module is installed in the right slot. To extend the CPU
module, install it in an left empty slot .
9 Set the slider of the CPU guide rail to the lock position.