Toshiba Magnia 3030 - Manual (Page 136)

System Configuration Setup
SSU (System Setup Utility) 118
Settings: Typematic Speed: 30 CPS
Usage: Enter the auto-repeat time for the keyboard.
Settings: Typematic Delay: 1/2 second delay
Usage: Enter the auto-repeat delay time for the keyboard.
Option: SCSI ROM BIOS Group
Settings: Embedded SCSI devices Option ROM Scan: Enable
Usage: This item sets the BIOS ROM of the Onboard SCSI Controller valid (Enable)
or invalid (Disable). Usually set this item to “Enable”.
Check and Setup of Resource of PCI Device
(PCI Card: Bus 00 Dev XX...)
If “PCI Card” is selected on the “Devices” menu, the dialog box as shown
below appears on the display and you can check and change the setting of the
PCI device. The following menu is an example when “PCI Card: Bus 00 Dev
0C” - “Multifunction Controller” is selected.
When “Choice” is selected, three commands of the following are shown for
selection.
™ Enable