Toshiba Magnia 3030 - Manual (Page 62)

Getting Started
Setup of System Configuration 44
Setup of System Configuration
If the system is used as it was configured at the factory, it was properly set up
before shipment. However, if something optional is added to the system after
shipment or it is desired to change the operating condition properly for use, it is
required to set up the system once again.
There are the following utilities prepared for setup of the system configuration.
See “Chapter 3. System Configuration Setup” on page 105.
SSU (System Setup Utility)
The SSU is used to manage (setting up, saving data, printing) the hardware
resources (memory address, I/O port, DMA channel, interrupt level, etc.)
contained in the system.
When “Simple setup” is selected from the “Selection of hardware system
configuration” menu of the Toshiba Server Setup Tool, it is not necessary to use
the SSU for setting because a proper value is automatically set for every item by
the “Simple setup”. When “Detailed setup” is selected from the menu, the SSU
is activated.
Installation with the Toshiba Server Setup Tool:
See “Toshiba Server Setup Tool User’s Guide”.
BIOS Setup Utility
The BIOS Setup Utility is used to set the hardware of this system.
Some items can be set by either of the SSU (System Setup Utility) and BIOS
Setup Utility.
Onboard SCSI Utility
The Onboard SCSI Utility is used to set the onboard SCSI units and onboard
SCSI controller.