Toshiba Magnia 3030 - Manual (Page 156)

System Configuration Setup
BIOS Setup Utility 138
™ Floppy Write Protect : Disabled
Set whether data writing on the floppy disk is to be enabled or disabled in
Security mode.
→ (Security) Floppy Write Protect
™ Front Panel Lockout : Disabled
Set whether or not the front panel is to be locked (“Enabled” or “Disabled”)
in Security mode.
Server menu
All are recommended settings.
™ System Management
An error display function is set and serial numbers are displayed. Selection
of “System Management” makes a display of the submenu shown below.
Do not change the setting.
Server Management Info
Displays the serial number and revision number of the mother board.
System Event Logging : Enabled
After detecting a disk drive or cooling fan error, the system creates “Event”
and blinks the system status indicator lamps. Selection of “Enabled” creates
an event log in the system. Selection of “Disabled” does not create an event
log in the system.
Clear Event Log : No
When this item is set to “Yes”, the event log that contains error information
will be cleared next time the server is started. After the log has been cleared,
the setting will be reset to “No”.
The following setup items relate to the EMP functions:
EMP Password Switch : Disabled
EMP ESC Sequence : +++
>System Management
>Console Redirection
>PEP Management
Enable Sleep Button: [No]
PCI IRQs to IO-APIC Mapping: [Enabled]
Processor Retest: [No]
Assert NMI on SERR [Enabled]