Toshiba Magnia 3030 User Manual

Page 104

Installing and Removing Hardware
Installing the DDS Auto Loader

Installing the rails

NOTE: There are three predrilled holes on each rail. Use the upper round-
type mounting holes.

11 Insert the device slightly into an empty slot and connect the power and sig-

nal cables.

12 Push the device in firmly until the latches click into place.

Inserting the DDS auto loader

NOTE: Be careful not to interpose other cables.

13 Install the server panels.

For the EPS-R model, install the fan duct first.

14 Install the power cable and turn on the power of the server.

If your server is an EPS-R model, always turn on the DC operate switch
before turning on the power switch.