Toshiba Magnia 3030 - Manual (Page 120)

Installing and Removing Hardware
Power Supply Unit 102
1 Set the switch of an EPS-R unit to be removed to OFF ( ).
Switch
2 Remove the security bracket of the EPS-R unit.
3 Turn the screw counterclockwise.
Do not pull the screw out.
4 Grasp the handle and pull it out while holding the eject lever.
Removing the EPS-R unit
5 Install an EPS-R unit cover in the empty power slot.
6 Tighten the screw and secure.
7 Install the security bracket of the EPS-R unit.
8 Update the SMC board information.