Toshiba Magnia 3030 - Manual (Page 185)

Installing Software
Installing the NetWare 5
167
1 Move the cursor to “Network boards” on the screen shown above with the
arrow keys, and press the key.
2 When the “List of network drivers currently selected” appears, delete the
drivers with the key.
3 Set the floppy disk labeled “Intel EtherExpress PRO/100+ LAN Adapter
Configuration and Drivers Diskette NetWare” (created by the Toshiba
Server Setup Tool) in the floppy disk drive.
4 Select “Add an unlisted driver ” by pressing the key.
5 Press the key to retrieve drivers contained in the floppy disk.
When the drivers are detected, they are added to the “List of network drivers
currently selected”.
6 Select “E100B.LAN”.
7 Proceed with installing operation following the instructions that appear on
the screen.
|| CE100B,LAN || Intel(R)PRO PCI Adapter(CHSM Spec 1.11)||
|| E100B,LAN || Intel(R)PRO PCI Adapter(AHSM Spec 3.31)||
The following drivers were detected for this server. Add, change,
or delete device drivers as needed.
Device types Driver names
Storage Devices: IDEATA, IDECD
Network boards: E100B
NetWare loadable modules (optional)
_Continue
_Modify
options