Toshiba Magnia 3030 - Manual (Page 157)

System Configuration Setup
BIOS Setup Utility
139
EMP Hangup Line String : ATH
Modem Init String : AT&F0S0=1S14=0&D
High Modem Init String : 0
EMP Access Mode : Disabled
EMP Restricted Mode Access : Disabled
EMP Direct Connect/Modem Mode : Direct Connect
See “EMP (Emergency Management Port)”
™ Console Redirection
Set console redirection data. Selection of “Console Redirection” makes a
display of the submenu shown below. Do not change the setting.
ComPort Address : Disabled
IRQ# : None
Baud Rate : 19.2K
Flow Control : CTS/RTS +CD
™ PEP Management
Set PEP data. Do not change the setting.
PEF Filter Event
PEP Enable : Disabled
PEP Blackout Period : 0
PEP Page String :
Send Test Page : Press Enter
™ Enable Sleep Button : No
Set whether the sleep function is to be made (“Yes”) or not (“No”).
™ PCI IRQs to IO-APIC Mapping : Enabled
Controls PCI bus interruption. Select “Enabled” to use Windows NT or
“Disabled” to use NetWare.
™ Processor Retest : No
Set this item to “Yes” to delete the previous CPU error information and con-
duct CPU diagnostic tests in initial diagnosis during the next start of the
server. Once the tests have been conducted, the setting returns to “No” auto-
matically. Set this item to “Yes” after CPU module has been added or
replaced.
™ Assert NMI on SERR : Enabled