Toshiba Magnia 3030 - Manual (Page 173)

155
Installing Software
Windows NT Server 4.0
For installing the Windows NT Server 4.0 manually
For installing the Windows NT Server 4.0 manually, it is required to set up the
hardware, RAID and to create the driver floppy disk before starting actual
installation.
Operate following the procedure mentioned below.
1 Set the CD-ROM and Startup Disk of the Toshiba Server Setup Tool in the
server, and activate the Toshiba Server Setup Tool.
2 After setting up the hardware and RAID, select “Manual installation of Win-
dows NT” on the “OS Install Selection” screen.
See “Toshiba Server Setup Tool User’s Guide”
3 Select “Utilities”.
4 Select “Creating FDs”.
5 Select the following name of the floppy disk, and select “OK”.
Adaptec 7800 Family Manager WindowsNT/95
Intel LAN Driver NT
6 Set a blank floppy disk in the floppy disk drive and select “OK”.
If the Startup Disk has been set in the floppy disk drive, remove it before-
hand.
7 After creating the floppy disk, verify the contents of the floppy disk label by
the “Creating FDs” menu of the “Utilities” and label the floppy disk.
FD label: 7800 Family Manager Set
Microsoft WindowsNT, Microsoft Windows95/98