Toshiba Magnia 3030 - Manual (Page 183)

Installing Software
Installing the NetWare 5
165
1 Move the cursor to “Storage adapters” on the menu shown above with the
arrow keys, and press the key.
2 As the following menu appears, delete “AIC78U2” with the key.
3 Set the floppy disk labeled “7800 Family Manager Set Novell NetWare
3.1x/Novell NetWare 4.xx” (created by the Toshiba Server Setup Tool) in
the floppy disk drive, and select “Add an unlisted driver ”0D by press-
ing the key twice. 0D
4 Press the key to retrieve drivers contained in the floppy disk.
The following drivers are added to the screen.
(The two drivers are added because the Onboard SCSI has two channels.)
5 Proceed with installing operation following the instructions that appear on
the screen.
Selecting the RAID Controller driver
Operate following the procedure mentioned below.
1 Select the Onboard SCSI Controller driver following the procedure of the
previous section “Selecting Onboard SCSI Controller driver”.
2 Delete “AIC78U2” on the same screen as shown in the previous section.
3 Set the floppy disk labeled “MegaRAID Drivers & Utilities for Series XXX
NetWare/MS-DOS” (supplied with RAID Controller) in the floppy disk
drive, and press the key to select “Add an unlisted driver “.
|| AIC78U2.HAM || ||
|| AIC78U2.HAM || ||
Add, edit, or delete storage drivers. Each controller/adapter
requires a driver.
Driver name Device name Stat
_AUC78U2.HAM _ Adaptec AHA-3950U2B _
_AUC78U2.HAM _ Adaptec AHA-3950U2B _
_IDETA.HAM _ Generic ATA/IDE/ATAPI.Adupter _
_Return to driver summary
_Modify
Additional Driver Options