Toshiba Magnia 3030 - Manual (Page 140)

System Configuration Setup
SSU (System Setup Utility) 122
Registration of data on ISA expansion card
(Add ISA Card)
For adding data on the ISA expansion card to the system configuration data,
select “Add ISA Card” on the “Resources” menu and then select the file from
the CFG file list as shown below. “!INT3228.CFG”, “!INT3250.CFG” are data
files of the mother board. “!TOS700B.CFG” is the data file of an expansion
card (example).
NOTE: Before adding data on the ISA expansion card to the system config-
uration data, be sure to access the “Resource Use” menu to check the use
status of the resources and change settings depending on the situation.
Deletion of data on ISA expansion card
(Remove ISA Card)
For deleting data on the ISA expansion card, select the ISA expansion card that
you want to remove on the “Resources” menu, and select “Remove ISA Card”.
Boot Devices
Select this menu to check and change the order of priority of devices to boot the
mother board. When “Boot Devices” is selected from the main menu, the fol-
lowing menu appears.