Toshiba Magnia 3030 - Manual (Page 132)

System Configuration Setup
SSU (System Setup Utility) 114
9 Change the settings of the expansion card switch and jumper switch in
accordance with the data entered for the ISA expansion card.
10 Set the ISA expansion card into the ISA slot.
11 Restore the panels to the server.
12 Switch on the server again and check to see if no error message appears on
the display.
Removing ISA Expansion Card (with CFG file)
For removing the ISA expansion card (with CFG file), follow the procedure
mentioned below.
1 Switch on the server and start the SSU (System Setup Utility).
2 Select “Resources” from the “Task” menu.
3 Select “Remove ISA Card” and delete the data on the ISA expansion card
to be removed.
4 Select “Save” to save the data on the new system configuration.
5 Shut down the server and unplug the power cable after cutting off the power
supply.
6 Remove the panels.
See “Removing and replacing the server panels” and “Removing the side
panel (for pedestal models)” on page 25.
7 Remove the ISA expansion card from the ISA slot.
8 Restore the panels to the server.
9 Switch on the server again and check to see if no error message appears on
the display.