Viewing the lmc (physical library view shown) – HP StoreEver ESL G3 Tape Libraries User Manual
Page 93
•
The tool bar displays icons that represent the most commonly run commands: I/E (view the im-
port/export station slots), IMPORT (load tapes into the library from the import/export station), EX-
PORT (move tapes from the library into the import/export station), EVENTS (view library events),
EXPLORER (finding a tape in the library), and LOG OFF. See
•
The library information panel fills most of the main LMC display, presenting operational data from
the current library, whether the current library is the physical library or a partition. The operation
data is presented in four sections: Managed Views, Slots Utilized, Data Transfer, and Configuration.
Of these, only Managed Views is an active section, meaning the user can interact with it. The
others only display information. See
Reading the Library Information Panel
.
•
The Overall System Status buttons provide current status information for the six subsystems of the
physical library: Drives, Connectivity, Control, Robotics, Power, and Cooling. See
.
See
to interpret information provided from clicking the Robotics
button in the Overall System Status section.
Figure 11 Viewing the LMC (physical library view shown)
.
HP Enterprise Systems Library (ESL) G3 Tape Library
93