Shutting down/rebooting the library – HP StoreEver ESL G3 Tape Libraries User Manual
Page 118
Partition
Physical library
Privilege level
Commands using remote client
Operations menu
X
X
Admin, User
1,
,
Guest
1
Robotics
X
X
Admin, User
1,
,
Guest
1
Power
X
X
Admin, User
1,
,
Guest
1
Cooling
1
Users can use this command only from partitions to which they have privileges.
2
Physical library must be offline.
3
Physical library must be online.
4
Feature is configurable from the library OCP only, but the configuration is viewable from the OCP or remote client.
5
Shutdown is available to administrators only.
6
Guest can view the main LMC display, but cannot obtain more details or perform operations. Guests and users can view
status information from the faces of status buttons, but they cannot click them to obtain details.
Shutting Down/Rebooting the Library
Always perform the shutdown process before you remove power from the library. Shutdown prepares
the library operation system and firmware for when you physically turn off power to the library.
Shutdown makes sure that the library finishes all active commands received from the host and prevents
the processing of any new commands. It also shuts down all partitions. Shutdown can only be
performed from the OCP.
Reboot shuts down and restarts the library operating system and firmware. When performing a reboot,
the library finishes all active commands received from the host application and does not process any
new commands. The library shuts down all partitions and restarts them during the reboot. In addition,
if automatic inventory is enabled, the library performs an inventory of cartridges, tape drives, and
slots during a reboot. Reboot can be performed from the OCP or a remote client LMC.
CAUTION:
Before shutting down or rebooting the library, make certain there is no I/O activity on any of the
partitions.
To shut down or reboot the library:
1.
Make sure that you are viewing the physical library. From the View menu or in the Managed
Views region of the LMC, click the name of the physical library.
2.
Select Operations > System Shutdown.
The System Shutdown dialog box appears.
Operating the Library
118