HP StoreEver ESL G3 Tape Libraries - Manual (Page 100)

Description Area
The current date and user-enabled time. The date that appears
reflects user settings, but the system operates according to
Greenwich Mean Time (GMT).
System Information: Date
Lists the physical library and all partition as [physical library
name] (Physical), then [partition name] (Partition). Clicking the
library or a partition selects it so that all menu choices and
information displayed is specific to the library or partition se-
lected. This is the only interactive section of the Library Inform-
ation Panel.
Managed Views
This graph shows the percentage of occupied media slots in
the library or partition, depending on the current view. The
number of used media slots appears beneath the graph (occu-
pied slots/total number of storage slots).
Slots Utilized
The bar graph contrasts the amount of data read and written
for the past 24 hours. The units being reported appear beside
the graph.
Data Transfer
Configuration summary information is presented textually.
Data points reported are:
• Number of tape drives
• Drive types: LTO–4, LTO-5, or MIXED
• Total number of licensed storage slots (appears only in the
physical library view)
• Total number of storage slots in the physical library or
partition, depending on the current view
• Library type
Configuration
System Status Buttons
System status buttons are located in the Overall System Status area at the bottom of the LMC. See
Figure 13 .
Figure 13 System Status Buttons in Good Status
.
Each button represents a subsystem. Table 12 lists the library subsystems and some of the components
that each subsystem represents. Each field replaceable unit (FRU) in the library belongs to one of the
subsystems.
Operating the Library 100