HP StoreEver ESL G3 Tape Libraries - Manual (Page 204)

NOTE:
If the physical library is not offline, you receive a message that asks you whether you want to
take it offline. Click Yes.
The library automatically logs off other users so that they cannot perform library operations while
the library software update operation is in progress.
The Software Update Progress dialog box appears.
Real-time progress information appears under Progress Summary in the Description and Status
columns.
NOTE:
The components that already have the correct version loaded will quickly transition to a Success
status during the reinstall process.
CAUTION:
During the update, the Abort button appears dimmed and is unavailable. Do not interrupt the
update process before it is completed. Interrupting the update process might cause the library
to become unusable until its software is restored.
4. After the update process completes, click OK.
Within approximately a minute after completing the update process, the RCU restarts.
CAUTION:
Do not perform any library operations until the RCU is completely restarted.
NOTE:
Before the RCU is restarted, the main menu Activity panel displays the message, WARNING:
The Robotics is not Enabled
. This message indicates that the RCU is not yet ready.
When the RCU is ready, the message disappears.
5. Bring the physical library online.
a. From the LMC, click Operations > Change Mode.
b. Select Online, and then click OK.
6. Click Help > About. Validate that the components reflect the correct firmware version.
Rolling Back to the Previous Build Package
To roll back to the previous build package:
1. On the Library System Software Update dialog box, select Rollback to package.
2. Click Next.
Managing library firmware and software versions 204