HP StoreEver ESL G3 Tape Libraries - Manual (Page 150)

Table 30 describes the elements on the Drives dialog box.
Table 30 Drives Dialog Box
Description Element
In the Drive(s) area:
Enables you to select the type of drives to list on the Drives dialog box (for
example, LTO4 for LTO-4 tape drives). All lists every drive in the library.
Drive Type drop-down list
The state of the drive (Varied On or Varied Off). State
The type of drive (for example, LTO--5 - FC). Drive Type
The location of the drive by means of a coordinate system. For information
about location coordinates, see
Understanding Location Coordinates .
Location
The status of the drive as reported by the event system (for example, Good
or Failed).
Health
Indicates the World Wide Name of the drive. WWN
If a cartridge is loaded in the specified drive, the barcode number of the
cartridge.
Barcode
The name of the partition to which the drive is assigned. Partition Name
The serial number of the drive. Serial #
The drive firmware version. Firmware Version
Maintaining the library 150