HP StoreEver ESL G3 Tape Libraries - Manual (Page 186)

Retrieving, Emailing, and Saving MIB Files
The Retrieve MIBs option on the Tools menu allows you to retrieve the ESL G3 MIB files, which can
be compiled into your SNMP Management tools. After retrieving the MIB files, you can extract the
contents for use with a third-party SNMP tool. You can also e-mail or save the MIB file.
To retrieve MIB files:
1. Log on as an administrator.
2. Select Tools > Reports > Retrieve MIBs.
The Retrieve MIBs zip file dialog box appears.
3. To email the MIB file:
a. Click the radio button to select Email.
b. Either type the e-mail address or select one from the drop-down list.
c. In the Comment section, type a note to the recipient or any comments about the capture.
4. To save the MIB File, click the radio button to select Save, then click Browse to navigate to the
location where you want to save the MIB file on your computer.
5. Click OK to send or save the file and exit the dialog box.
Maintaining Air Filters
The access door of each control and expansion module has two air filters: one located at the top,
and the other located at the bottom, as shown in
Figure 23 .
Maintaining the library 186