HP StoreEver ESL G3 Tape Libraries - Manual (Page 31)

2 Modifying the Library Configuration
Before you can manage your library from a remote Library Management Console (LMC) client, you
must initially configure the library from the Operator Control Panel (OCP) on the library itself by either
running the Setup Wizard command or using individual configuration commands from the Setup
menu. For detailed information about initially configuring the library, see the HP Enterprise Storage
Library (ESL) G3 Installation and Configuration Guide.
After the initial setup, you can use either the OCP or the LMC to modify your library configuration.
The Setup menu includes most of the configuration commands.
NOTE:
Only one administrator can be logged on and performing library configuration at any one time. If
another administrator attempts to log on, a message appears, warning that only one administrator
at a time is permitted on the library. If a service user logs on while an administrator or regular users
are logged on already, the library automatically logs off those users.
Setup Wizard Prerequisites
Before you run the Setup Wizard:
• Note the name and IP address of your network Domain Name Server (DNS) or the IP address,
subnet mask, and default gateway for your network segment.
• Verify that your network is attached to the library network connection.
• Delete the default partition. See Deleting Partitions for more information.
Accessing the Setup Wizard
Before using the Setup Wizard, see Setup Wizard Prerequisites .
To access the setup wizard from the OCP or the LMC:
1. Log on as administrator. The home screen appears.
2. Verify in the System Information section, in the Name field that the physical library is selected.
If necessary, select it by one of the following methods:
• In the Managed Views section of the screen, click on the name of the physical library.
• From the menu bar, select View, then the name of the library.
3. Click Setup > Setup Wizard to display the About Setup Wizard screen.
HP Enterprise Systems Library (ESL) G3 Tape Library 31