HP StoreEver ESL G3 Tape Libraries - Manual (Page 79)

Configuring LDAP
To configure LDAP:
1. Select Setup > User Configuration > LDAP.
The LDAP Configuration dialog box appears with the General tab displayed.
2. On the General tab, you can enable or disable LDAP functionality:
• To enable LDAP, select Enable LDAP.
• To disable LDAP, clear the Enable LDAP check box.
NOTE:
If you disable LDAP, single sign-on functionality will not be available on the library.
3. To configure or modify LDAP, use the appropriate tabs and set the following configurations:
General tab:
• Server Configuration:
• Primary: You must provide a primary IP address or DNS name.
• Alternate: An alternate IP address or DNS name is optional.
• Secure: Use this check box to enable the setup options to access a secure LDAP server,
which can be done using any port except 389. The default secure port is 636. If you enable
this option, you must retrieve the Trusted Root Certificate from the server by clicking Retrieve
TR.
• Port: Enter the appropriate port in this field. The default port for non secure connections
is 389, and it is 636 for secure (SSL) based LDAP connections. The port setting can be
changed.
• Retrieve TR: Use this function to retrieve the Trusted Root Certificate from the LDAP server.
A dialog box displays basic Trusted Root certificate information, such as subject name,
MD5, and SHA 1 hashes. It is recommended that you verify this information independently
on the LDAP server.
HP Enterprise Systems Library (ESL) G3 Tape Library 79