HP StoreEver ESL G3 Tape Libraries - Manual (Page 81)

NOTE:
Non-admin library users also need to be members of the groups that match the partition
names for which they are granted access. These group names do not need to be specifically
listed anywhere in the LDAP setup on the library. When user logins are validated during
login, their group memberships for partition access are validated automatically.
5. To validate your configuration, click OK or Test.
6. Click the Test tab.
You can use the test functionality to simulate an LDAP login for a specific user and quickly discover
what access rights the user has and to what partitions the user has access.
Test User:
• User: Type the appropriate User name.
• Password: Type the user password.
7. To initiate the library authentication process to the LDAP server, click Test after providing the user
name and password.
A dialog box appears displaying what level of access the user is assigned, and to which library
partitions the user has access.
8. After you have entered the LDAP configurations, click Test to verify the LDAP connection.
A connection with the LDAP server is established, and the library determines whether the LDAP
Distinguished Names specified in the Access tab are valid.
A message box appears indicating the success or failure of the LDAP connection.
• If the connection failed, the error message contains information that you can use to resolve
the issue. Click OK to return to the LDAP Configuration dialog box.
• If the connection was successful, click OK in the message box and continue.
HP Enterprise Systems Library (ESL) G3 Tape Library 81