HP StoreEver ESL G3 Tape Libraries - Manual (Page 47)

6. The library deletes the selected partition. Repeat the process to delete another partition, or click
Close.
Selecting partition and configuration for control path
To select a partition and configure the control path, perform the following steps:
1. Log on as an administrator.
2. From the main console, select Setup > Partitions > Control Path.
The Secure Manager Partitions dialog box appears.
3. Highlight the partition you want to configure, and click OK.
The Control Path dialog box appears.
4. Select the drive you want to configure as the control path.
The primary Control Path Drive you selected is highlighted in yellow, and the Enable Control Path
box is selected automatically.
5. Click OK to finish.
HP Enterprise Systems Library (ESL) G3 Tape Library 47