HP StoreEver ESL G3 Tape Libraries - Manual (Page 83)

2. Do one of the following:
• Select Default to use the default HP screen saver with standard settings.
• Select Custom to change screen saver settings such as activation, movement, or images.
• Select Off to disable the screen saver. (The current settings are cleared.)
If you selected Custom, go to the next. Otherwise, go to
6 .
3. Under Activation, enter a value in the Wait box to specify how much idle time must pass before
the screen saver is activated. The activation wait time can be 1–120 minutes.
4. Under Movement, specify the position and the motion of the screen saver image on the screen.
• Select Random to display the screen saver image in a variety of positions.
• Select Stationary to display a static screen saver image that does not move.
• Select Linear to display the screen saver image as a floating image.
• Enter values in the horizontal and vertical boxes to specify the movement of the screen saver
image in pixels.
• Enter a value in the Motion Delay box to specify the movement speed of the screen saver
image.
5. Under Images, specify the image files to display for normal functions, warning notices, and failure
notices. You must select image files for all three functions.
• To specify an image file, click Browse. Select the image file and then click Open. The image
file must be in GIF, JPEG, or PNG format, and cannot be larger than 1 MB. In addition, image
resolution is limited to 600 x 800 pixels.
• Click Preview to preview an image file.
HP Enterprise Systems Library (ESL) G3 Tape Library 83