HP StoreEver ESL G3 Tape Libraries - Manual (Page 251)

7. If you selected HP Enterprise Secure Key Manager (E SKM) Local Authority:
a. Follow the instructions on the Retrieve the Local Certificate Authority Certificate, then click
Next.
b. Locate and copy the signed certificate from the ESKM local authority, paste the text of the
certificate into the text box on the Certificate Authority Certificate Entry page, then click Next.
c. Follow the instructions on the Library Certificates Information screen, then click Next.
d. Copy the text of the certificate shown, then click Next.
e. Read the Sign your Library Certificate page, follow the instructions, then click Next.
f. Paste the text of the certificate into the text box on the Signed Certificate Entry page, then
click Next.
g. Read the HP Enterprise Secure Key Manager Information page and click Next.
h. Type the Library Username, and Password in the appropriate fields in the HP Enterprise
Secure Key Manager Configuration page, then click Next.
IMPORTANT:
You must first configure the username and password for this library in the ESKM
Management Console.
i. In the Tier #1 region of the dialog box, type the name of an ESKM Node address into the
ESKM Node Address #1 field, add any other node addresses to the tier as appropriate.
NOTE:
Tiers are a way to indicate which ESKM servers a library should contact first when it
needs to get an encryption key. For example, to avoid network performance issues,
you might want a library to access local ESKM servers before remote ESKM servers.
To specify this, you would enter the local ESKM server in tier 1 and the remote ESKM
servers in tier 2. The library will try to get a key from any of the ESKM servers in tier 1
first. If none of the ESKM servers in tier 1 respond, it will move to tier 2. If you add or
remove an ESKM from your network, you will need to update the tier information by
running the Key Management Setup Wizard and selecting Update Key Manager
Configuration on the first page of the wizard.
j. To change the SSL port number for the node in the tier from the default, click Advanced,
enter the correct value in the Port Number field, then click OK.
k. To add another tier, select the Add another tier box and enter information as you did for
Tier #1.
l. In the Key Management Setup Summary page of the wizard, review the information, correct
it if necessary, then click Finish.
HP Enterprise Systems Library (ESL) G3 Tape Library 251