HP StoreEver ESL G3 Tape Libraries - Manual (Page 128)

Version Status Description Serial Number Item
N/A
The number of meters horizont-
ally traveled during the library
history.
The RCU serial num-
ber Horizontal
Motion
2. To mail, save, or print status information, use the Send button (see Emailing, Saving, and Printing
Status Information ).
3. Click Close to close the dialog box.
Monitoring Drive Status
The Drive Status dialog box displays status information for tape drives in the currently-selected partition.
If you are working in the physical library, status information for all drives appears. You can perform
this procedure while viewing either the physical library or a partition.
To monitor drive status:
1. Make sure that you are viewing the physical library or the appropriate partition. From the View
menu or in the Managed Views region of the LMC, click the name of the physical library or
partition.
2. Click Monitor > Drives.
The Drive Status dialog box appears.
Table 19 describes the elements on the Drive Status dialog box.
Table 19 Drive Status Dialog Box
Description Element
The type of drive (for example, LTO--5 – FC). Type
For a Fibre drive only, the World Wide Name of the drive. WWN
For a Fibre drive only, the World Wide Name of drive port 1. WWN Port 1
For a Fibre drive only, the World Wide Name of drive port 2. WWN Port 2
The status of port 1 on the drive as reported by the RAS system (for example,
Good or Failed).
Link Status P1
The status of port 2 on the drive as reported by the RAS system (for example,
Good or Failed).
Link Status P2
Drive health as reported by the RAS system (for example, Good or Failed). Health
The firmware level of the drive. Firmware level
The barcode of the cartridge in the drive. Barcode
The location of the drive by means of a coordinate system. For information
about location coordinates, see
Understanding Location Coordinates .
Location
The serial number of the particular drive. Physical SN
The name of the drive vendor. Vendor
Monitoring the library 128