HP StoreEver ESL G3 Tape Libraries - Manual (Page 152)

Description Element
The serial number of the drive. Physical SN
The logical serial number that the library assigns to a drive in a specific
location. This is not the serial number of the particular drive (see Physical
SN in this table).
If a drive is replaced by another drive in the same library location, the
logical serial number remains the same. From the host’s perspective, the
replacement drive is the same as the original one.
If the logical serial number addressing feature is disabled for the library,
Disabled appears in this field.
Logical SN
The location of the drive by means of a coordinate system. For information
about location coordinates, see
Understanding Location Coordinates .
Location
The type of drive (for example, LTO4 for LTO-4 tape drives). Drive Type
The type of interface (FC). Interface Type
The World Wide Name of the drive. WWN
The assigned logical unit number. Assigned LUN
The status of the drive (Varied On or Varied Off). Online Status
If the drive currently has no errors, No Error appears in this field.
If the library is unable to acquire a drive error code, such as when the
robotics are disabled, Unavailable appears in this field.
Drive Error Code
The status of the drive as reported by the event system (for example, Good
or Failed).
Health Status
For Fibre drives only, the loop ID assigned to the drive. Fibre Channel Loop ID
For Fibre drives only, the way in which the loop ID is assigned to the drive
(Hard or Soft).
Fibre Channel Loop ID Mode
The number of loads during the drive history in this library. Number of Loads
The number of read errors that have occurred during the drive history in
this library.
Read Errors
The number of write errors that have occurred during the drive history in
this library.
Write Errors
The amount of data in megabytes that the drive has read during its history
in this library.
Megabytes Read
The amount of data in megabytes that the drive has written during its history
in this library.
Megabytes Written
3. To return to the Drives dialog box, click Cancel.
Emailing and Saving Support Tickets
To mail and save drive logs:
1. From the Drives dialog box, click Support Ticket.
Maintaining the library 152