HP StoreEver ESL G3 Tape Libraries - Manual (Page 220)

Table 36 describes the elements on the Details tab.
Table 36 Event Details Dialog Box, Details Tab
Description Element
In the Event # area:
The current state of the event. Possible states are:
• Open — indicates that an issue, whether problem or warning condition, has
occurred in the library that requires attention.
• Closed — indicates that a user has closed the issue.
• Verified — indicates that the library has successful operational results or positive
data that verifies that the problem is resolved.
State
The date and time on which the library created the report. Posted
The subsystem that caused the event. Possible subsystems are:
• Connectivity
• Drives
• Control
• Power
• Cooling
• Robotics
Status Group
If the event is closed, the date and time on which it was closed. Closed
The severity level that is associated with the status group (subsystem). Possible levels
are:
• 1 (Failed)
• 2 (Degraded)
• 3 (Warning)
• 5 (Good)
Severity
The number of times that the library has reopened the event. If an event is in the
Closed or Verified state and the identical problem occurs again within 30 minutes,
the library reopens the event and increments the event’s duplicate count. If the library
has not reopened the event, the value is zero (0).
Events that are in the Closed or Verified state for more than 30 minutes cannot be
reopened. In this case, if the identical problem occurs again, the library creates a
new event.
Duplicates
The serial number of the particular FRU. FRU SN
The name of the repair page that is associated with the report. Repair Link
The status of the FRU. Possible statuses are:
• Failed
• Degraded
• Warning
• Good
FRU Status
Troubleshooting your Library 220