HP StoreEver ESL G3 Tape Libraries - Manual (Page 82)

9. To accept and save the library configuration, click OK in the LDAP Configuration dialog box.
10. To validate your configuration, click OK or Test.
Configuring library behavioral settings
The Library Behavioral Settings dialog box is used to enable and disable the following features of the
library:
• Automatic teach
• Automatic inventory
• Automatic drive unload
• Logical SN addressing
• IPv6
• Extended I/E
To enable or disable these features:
1. Click Setup > Library Settings > Library Behavioral Settings.
2. For each feature, select the Enable or Disable radio button.
3. Click OK.
Configuring screen saver preferences
Use the Screen Saver preferences tab to customize the images that display on the LMC screen when
the library is not in use. The screen saver starts automatically if the library is idle for a specified amount
of time.
NOTE:
Screen saver preferences can only be configured remotely, not using the touch panel.
To configure screen saver preferences:
1. From the menu bar, click Setup > Library Settings > Screen Saver.
The Preferences dialog box appears with the Screen Saver tab displayed.
Modifying the Library Configuration 82