HP StoreEver ESL G3 Tape Libraries - Manual (Page 143)

To revert library configuration:
1. Log on as an administrator from the remote client or from the library OCP.
2. Make sure that you are viewing the physical library. From the View menu or in the Managed
Views region of the LMC, click the name of the physical library.
3. Click Tools > Save/Restore.
The Save and Restore Library Configuration dialog box appears.
4. Click Revert.
NOTE:
If the library is not offline, you receive a message that asks you whether you want to take it offline.
Click Yes.
5. At the prompt, check whether all library data input and output has stopped. To continue, click
Yes.
When the system determines that it can reconfigure the library using the saved image, a message
dialog box appears that informs you that the library will reboot itself. The reset could take minutes
to complete. If you are near the library and can see the library OCP, normal behavior is when
two working messages appear and the OCP goes dark when the LMC server restarts.
As the MCB reboots, the MCB, LMC server, and robotics control unit (RCU) change to the config-
uration settings stored in the rescue image.
When the LMC has restarted, reconnected, and completed its discovery operation, a message
appears that indicates that the library has been restored to its previous configuration.
If the operation succeeds, a message appears that indicates that the library has been restored
to its previous configuration.
If the operation fails at any point, the library generates an event that contains details about the
failure. Perform a revert or rescue to return the library to a stable configuration.
6. If you have not already done so, make sure that the robotics are enabled and bring the library
back online so that data input and output can recommence.
Emailing or Saving the Configuration Record
Use the Email Configuration Record dialog box to:
• Send the configuration record to a selected e-mail address. See Emailing the Configuration Record .
• Save the configuration record to a specified .txt file. See Saving the Configuration Record .
Before you can e-mail the configuration record, the library e-mail account must be configured. For
information on configuring the library e-mail account, see
Configuring E-mail .
NOTE:
Only users with administrative privileges can e-mail or save the configuration record.
Emailing the Configuration Record
To e-mail the configuration record:
1. Log on as an administrator.
HP Enterprise Systems Library (ESL) G3 Tape Library 143