HP StoreEver ESL G3 Tape Libraries - Manual (Page 177)

• If the problems persist, you may need to replace the picker assembly.
Scan Fiducials
The scan fiducials graphical report shows the results for tests of the fiducial barcode on each tape
magazine and drive sled, including the width, expected Y position (shift), and the number of hits the
scanner receives while traveling up and down. (Only known magazines are tested.)
• If the graphical report shows a failed result for one or more tape magazines, replace the affected
magazines.
• If there are multiple marginal or failed results, run the library alignment test (part of the installation
verification or partial frame test) to make sure the library is level.
• If the library is level and there are multiple marginal or failed results, the scanner should be inspec-
ted and replaced if necessary.
Picker Pivot/Reach
The picker pivot/reach graphical report shows the results for tests of the picker while performing
rotation and reach/retract actions.
See Figure 21 .
Figure 21 Picker Pivot/Reach Graphical Report
.
HP Enterprise Systems Library (ESL) G3 Tape Library 177