HP StoreEver ESL G3 Tape Libraries - Manual (Page 137)

Description Element
The temperature status in the vicinity of the sensor. If the temperature is within
normal operational limits, the status is Nominal. Otherwise, a warning or alarm
is indicated.
Status
The sensor temperature reading in degrees Celsius. Celsius
The location of the temperature sensor within the library. Control management
blade (CMB) locations are indicated by means of a coordinate system. For inform-
ation about location coordinates, see
Understanding Location Coordinates .
Location
2. To view current information, click Refresh.
Displaying Voltage Information
To display voltage status information for various library components:
1. Click the Voltage tab on the Sensor Status dialog box.
Table 27 describes the elements on the Voltage tab.
Table 27 Voltage Information on the Sensor Status Dialog Box
Description Element
The name of the voltage sensor. Name
The voltage status at the location of the sensor. If the voltage is within normal
operational limits, the status is Nominal. Otherwise, a warning or alarm is indic-
ated.
Status
The sensor voltage reading in millivolts. Millivolts
The type of power at the location of the sensor (AC or DC). Type
The location of the voltage sensor within the library. Control management blade
(CMB) locations are indicated by means of a coordinate system. For information
about location coordinates,
Understanding Location Coordinates .
Location
2. To view current information, click Refresh.
Saving and Restoring Library Configuration
The library save and restore capabilities enable you to save a remote or local copy of configuration
settings for the library drives and partitions, including the allocation of drives, storage magazines,
and I/E station magazines to each partition. If the current library configuration becomes lost or
unstable, you can use the LMC to apply the locally or remotely saved configuration image, which
eliminates the need to reconfigure the entire library to bring it back to its original state.
The Save and Restore Library Configuration dialog box enables you to:
• Save configuration settings of a library as a remotely or locally stored image.
• Restore, revert, or rescue the library by applying a remotely or locally stored image of a library
configuration settings.
HP Enterprise Systems Library (ESL) G3 Tape Library 137