Spectra Precision Survey Pro v5.0 - Manual (Page 93)

To open the dialog, tap the settings icon in the title bar.
Display: Options are HA,ZA,SD or HA,HD,VD. Controls the values that appear in the Quick Shot screen.
MSR Key: There are two options:
Measure Only: When the MSR key is pressed, a measurement is initiated but no shot is stored.
Measure and Store: When the MSR key is pressed, a measurement is initiated and a sideshot is stored if a JOB
is open.
Note: The MSR2 key always operates in Measure and Store mode.
Shell to External Mode
Tap the Data Collector icon to open the Data Collection mode screen. This enables you to use an external data
collector.
[Exit and Go Robotic…]: Tap to change the radio channel and ID before the software is set to the internal radio and
exits the software.
[Exit and Go RS232 / USB]: Exits the application.
Quick Stake Routines
Quick Stake enables you to quickly and simply stake out and store a point and will work for both motorized
instruments with AutoLock capability and conventional mechanical total stations:
Quick Stake States
Operating Quick Stake
Stakeout settings
Note: For a description of common controls, see Quick Shot .
Quick Stake States
Blank: When no valid design point has been entered when it first started.
ANGLE TO TURN TO, DISTANCE: Once a valid point has been entered and an angle reading is received from the
instrument, Angle to Turn To appears with an arrow icon and the angle itself is in the current angle unit. When the
instrument is turned to the left by hand, the instrument operator sees the angle count down to 0 and past 0 and the
angle increases while the left arrow icon changes to a right arrow icon .
Note: If the instrument has servo motors, tap the turn icon so that the instrument can turn to 0 by itself.
COME/GO, LEFT/RIGHT, CUT/FILL: Tap the MSR button to shoot the target. If a slope distance is available, it
Survey Pro Help 5.00
93