Spectra Precision Survey Pro v5.0 - Manual (Page 40)

Zenith Tolerance: A warning message will be displayed if a vertical angle exceeds the tolerance entered here during a
repetition shot.
Distance Tolerance: A warning message will be displayed if a distance exceeds the tolerance entered here during a
repetition shot.
Shoot Distance To Backsight: When checked, a distance will be measured to each shot to the backsight. When
unchecked, only the angles are measured.
Do Not Shoot Reverse Distances: When checked, distances are not measured during reverse shots.
Enable Automatic Repetition: When checked, all remaining shots after the first shot to the backsight and foresight
will occur automatically when using a motorized instrument.
Shooting Sequence: Specifies the order that the shots are taken from the following options:
BS > FS ^ FS > BS: Backsight, Foresight, flop Foresight Backsight
BS > FS ^> BS > FS: Backsight, Foresight, flop Backsight, Foresight
BS ^ BS > FS ^ FS: Backsight, flop Backsight, Foresight, flop Foresight
FS ^ FS > BS ^ BS: Foresight, flop Foresight, Backsight, flop Backsight
FS > BS ^ BS > FS: Foresight, Backsight, flop Backsight, Foresight
FS > BS ^> FS > BS: Foresight, Backsight, flop Foresight, Backsight
BS ^ BS ^ > FS ^ FS ^: Backsight, flop, Backsight, flop, Foresight, flop, Foresight, flop
Date/Time Settings
The Date/Time Settings card is used to set the date and time in the data collector.
Time: Displays the current time.
Date: Displays the current date.
Format: Select Local to display your local time, or UTC to display Coordinated Universal Time.
DUT Correction: The polar wandering correction factor, in seconds, used to convert UTC to
UT1. (UT1=UTC+DUT)
Note: The date, time and UTC are computed using Window CE's Date/Time properties.
[Set Date]: Sets the system date with the date that is entered.
[Set Time]: Sets the system time with the time entered.
[Synchronize]: Zeros the fractional portion of the current time and advance to the nearest second so that the time can
be set more accurately.
NMEA GPS Settings
The NMEA GPS card is used to configure the settings for a NMEA GPS receiver for use with the GeoLock and
Navigation routines.
Survey Pro Help 5.00
40