Spectra Precision Survey Pro v5.0 - Manual (Page 92)

Job mode
Once you have opened a job, you can:
Perform station setup.
Go to stakeout mode.
Store sideshot or traverse shots or angle offset shots.
HA: Horizontal angle.
ZA: Vertical angle.
SD (or HD/VD): Current shot is bold until it is stored as a point. Non-bold values cannot be stored and the user is
prompted to take a new shot.
Note: SD ( or HD/VD ) from a shot initiated by the MSR2 key is prefaced with “*”.
The icons on the screen are used as follow:
Station setup: There are three options:
Stakeout: Launches the Quick Stake dialog.
Station Setup: Launches the Station Setup wizard.
Check Station: Launches the Check Setup dialog.
Turn to: Appears if the instrument supports motorized turning. There are two options:
Turn To: Launch the Turn To dialog.
Flip: Change the face of the instrument.
Search: Appears if the instrument supports auto lock. There are three options:
Search: Find a prism and lock onto it.
LockNGo: Lock onto a prism and follow it.
Stop: Stop tracking prism.
Store Sideshot: There are two options:
Sideshot: Store the currently displayed data as a sideshot, and invalidate the distance.
Traverse: Store the currently displayed data as a traverse shot, and invalidate the distance.
Laser Pointer/Tracklight: Toggle between using the laser pointer or tracklight.
Lock: Toggle the prism lock state.
Close button: Tap to go to the Survey Pro main menu.
Note: Taking a shot can be a two-step process, depending on the setting for the MSR key. First, initiate a
measurement with the MSR key. Once the shot has returned data, it appears on the dialog. You can then store the
displayed values as a sideshot or a traverse shot.
Quick Shot dialog settings
Survey Pro Help 5.00
92