Spectra Precision Survey Pro v5.0 - Manual (Page 70)

Station Setup Known Point – Orient Instrument – BS Point
BS Point: Enter the point name to use for the backsight point.
BS Azimuth: Displays the grid direction to the backsight point.
Fixed Target / Roving Target: Select the target type at the backsight point. Choose fixed target if you will use a
dedicated target at the backsight. Choose Roving Target if you will use the same target at the backsight as you will for
foresight points.
HR: Enter the height of the backsight target.
[Read Circle]: Tap to read the circle from the instrument
[Send Circle]: Sends the entered Backsight Circle to the instrument.
[Next >]: Advances to the Check Setup page. This button shows up when you are using check backsight as part of
the station setup work flow.
[Finish]: Records the setup and exits the wizard. This button only shows up when you have Skip Check during
Station Setup checked on the
Surveying card of the Job Settings pages.
Station Setup Known Point – Orient Instrument – BS Azimuth:
BS Azimuth: Enter the azimuth to the known azimuth reference mark.
[Read Circle]: Tap to read the circle from the instrument
[Send Circle]: Sends the entered Backsight Circle to the instrument.
[Next >]: Advances to the Check Setup page. This button shows up when you are using check backsight as part of
the station setup work flow.
[Finish]: Records the setup and exits the wizard. This button only shows up when you have Skip Check during
Station Setup checked on the
Surveying card of the Job Settings pages.
Station Setup Resection
The following screens are used when the setup type is set to Unknown Point / Resection.
Station Setup Resection – Enter Store Point
Store Pt: Enter the name for the new point to be stored as a result of the resection.
Description: Enter the description of the new point to be stored as a result of the resection.
HI: Enter the height of instrument if you are doing a 3D survey.
2D Survey Check this box to conduct a 2D survey. This option will allow you to select a 2D point for the occupy
point, and will disable the height of instrument and rod controls in setup and measurement taking user interface.
Shots per Resect Point: Enter the number of repetition sets you will collect for each point.
Survey Pro Help 5.00
70