Spectra Precision Survey Pro v5.0 - Manual (Page 118)

without going into static occupation mode. The point is stored with the description labeled on the button, for example,
[Ditch] or [TOPO]. You can also tap [Enter] to store a point with the last used description.
Note: Storing points in this routine does not change the last user specified description used in any survey routine.
Note: To enter a new description, or edit an existing button description in the Quick Codes screen, tap and hold the
button. The Quick Code button labels are saved in the \Program Files\Survey Pro\QuickCodes.ini file. You can copy
these files from one data collector to another to preload the list.
Base Info
[Survey] [Base Info]
The Base Info screen is used to display the details about the currently set RTK base receiver. This menu item is not
available when the base receiver is not yet set.
Base Point: Displays the current base point name..
Latitude: Displays the current latitude of the base point set in the software.
Longitude: Displays the current longitude of the base point set in the software.
Height: Displays the current height of the base point set in the software.
Antenna: Displays the details about the base receiver antenna.
Projection
[Survey] [Projection]
The Projection Information screen is used to select and solve the horizontal and vertical projections, which are used to
transform GNSS measured WGS84 coordinates (latitude, longitude, height) into local coordinates
(North,East,Elevation). The upper portion of the screen displays the status and details on the current projection mode.
The screen is also used to switch between Mapping Plane Mode and Default Ground Calibration mode . The buttons
available will vary depending on the current projection mode.
Projection – Default Ground Calibration Mode
The Projection screen is described here for when the horizontal projection mode is set to Default Ground Calibration.
Use this setting when you want ground level coordinates, and there is no projection and no datum to define a geodetic
coordinate transformation. In this mode, a default map projection is created with the first GNSS control point
collected. You collect GNSS measurement on points with known local coordinates, and solve a calibration adjustment.
The calibration adjustment will translate, rotate, and scale the default map projection’s (y,x) into your local coordinates
(N,E).
[Show Details…]: Opens the Projection Details screen, where the complete details of the calibration solution,
reference map projection, and Geoid model are displayed.
[Reset Origin…]: Opens the Calibration Set Zone screen, where you can enter the parameters of the intermediate
mapping plane to be used for the calibration adjustment.
Survey Pro Help 5.00
118