Record mode remote elevation, Remote, Elevation – Spectra Precision Survey Pro v5.0 User Manual
Page 83: Screen
Description: The description given to the next stored point.
HR: The length of the rod.
Number of Sets: The desired number of sets required when shooting each foresight. You must select at least one set.
[Traverse]: Prompts you to shoot the Foresight point. After each set is performed, the Move To Other End dialog box
will open and prompt you to set up on the new point and enter a new instrument and rod height. The
screen will then open to guide you through the setup on the forward point.
screen where the current backsight can be modified.
: A shortcut to the
screens.
Record Mode
[Survey] [Record Mode]
When running in Record Mode, all control of the total station is performed from the total station's keypad. The data
collector will simply log each shot that is taken from the total station.
This routine is typically used for topo work, where the total station remains over a single occupy point during all shots.
Note: Not all total stations support record mode.
Foresight: The point name that will be used when storing the next point. Once a point is stored, it will be incremented
to the next available point.
Description: The description for all the shots that are stored.
HR: The length of the rod.
Start Recording]: Starts recording all shots performed from the total station.
[Stop]: Stops record mode.
[Backsight…]: Opens the
screen. where the current backsight can be modified.
: A shortcut to the
Remote Elevation
[Survey] [Remote Elevation]
The Remote Elevation screen will compute the elevation for the occupy point by shooting a foresight with a known
elevation, or it will compute the elevation for a foresight when the occupy elevation is known.
Survey Pro Help 5.00
83