Survey map, Manage basemaps, Screen – Spectra Precision Survey Pro v5.0 User Manual
Page 228
screen (conventional mode), the
screen (robotic
screen (GNSS mode) where the selected point can be staked.
Stake to Line: (when a point is selected) Select a second point to define the line, then opens the
screen (conventional mode), or the
screen (GNSS mode).
Stake to Line: (when a line is selected) Opens the
screen (conventional mode), or
the
screen (GNSS mode).
Stake to Location: Opens up the
screen (conventional mode), the
screen
(robotic mode), or the
screen (GNSS mode) where the selected location can be staked.
Create Point: Opens up the
screen where you can create a new point at the selected (2D) location.
Show Results: Opens up a results view of all of the active map results generated for this instance of the map
view.
Clear Selection: Clears the active map results from the map view, and resets the selection of points and/or lines
in the active map.
Survey Map View
The main map can also be placed into survey mode, which allows you to collect points directly from the map. Tap and
hold on the main map to bring up the context menu that allows you to toggle between map view and survey map mode.
The controls on the active survey map are:
or
Topo Observation: Takes a tracking mode observation and stores the point with the point name,
description, and feature code (if showing) from the survey map controls at the bottom of the screen.
or
Observation: Starts a standard mode observation, and when the observation is accepted, prompts you for
all of the surveying prompts you have selected on the
card of the
or
Height of Rod: Opens up a height of rod (conventional mode) or height of GNSS antenna (GNSS mode)
prompt, where you can change the current HR.
Station Setup: (conventional mode) Opens up the
screen where you can check or modify the current
instrument setup.
GNSS Status: (GNSS mode) Opens up the
Pt: Enter the point name for the next survey point to store.
Desc: Enter the description for the next survey point to store.
Show Autolinework Code Controls >: Shows the
control. Show this control if you wish to add
feature codes and/or auto linework control codes to topo survey points.
Hide >: Hides the
control . When this control is hidden, topo survey points will be stored
without feature codes or auto linework control codes. If you have prompt for Feature and Attributes set on the
card, you will still be prompted for feature codes for regular observation points.
Enter Key: Triggers a Topo Observation or a standard observation, depending on the Survey Map Use Enter Button
for Topo setting on the
card of the
.
Manage Basemaps
Survey Pro Help 5.00
228