Find point, Edit station – Spectra Precision Survey Pro v5.0 User Manual
Page 53
The raw data is displayed in a tree view, with the root nodes of the tree showing a record of each survey action taken
in the current job. You can expand a tree node by tapping on the [+] next to the node or double tapping on the node.
This will show you the individual fields of the selected record.
You can navigate through the raw data view using the navigation buttons:
[Up]: Navigate to the beginning of the records.
[Down]: Navigate to the end of the records.
[Left]: Navigate to the previous record in your navigation history.
[Right]: Navigate to the next record in your navigation history.
[Find Point]: Opens up the
screen where you can enter the name of a point to search for in the
records
[Find Next Point]: Searches for the next reference to the point name selected by the Find Point screen.
You can tap and hold on selected records to open up a screen to edit that specific record. The following records can be
edited:
[Conventional Setup]: Opens up the
[Conventional Target]: Opens up the
screen.
[GNSS Base Setup]: Opens up the
screen.
[GNSS Antenna]: Opens up the
screen.
You can tap and hold on any record to attach a note to this specific record. You can also append a note to the end of
the file by tapping the [Note...] button.
[Time]: Appends the current date and time in the form of a note to the end of the raw data records.
Raw Data Find Point
[Job] [View Raw Data] [Find Point]
The Raw Data Find Point screen allows you to enter an existing point name to search for in the raw data records.
[Point]: Enter the name of the point to search for.
Raw Data Edit Station
[Job] [View Raw Data] [Edit Station]
The Raw Data Edit Station screen allows you to edit the conventional station setup.
[Occupy Point]: Enter the occupy point for this station setup.
Note: If you wish to change the station setup point, you can only choose a user entered point (key in or imported) as
the new station point for this setup. If you wish to use a point derived from a survey measurement, you must first go to
the Edit Points screen and insert a copy of that point.
[HI]: Enter the height of instrument for this setup.
Survey Pro Help 5.00
53