NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 86
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information
User Manual
86
You can select only names of schedules that you created (see
).
7.
Select the check boxes for the days on which the PoE timer schedule must be active.
8.
In the
Start Time
field, enter the start time in the hh:mm 24-hour format.
The start time applies to all selected days.
9.
In the
End Time
field, enter the end time in the hh:mm 24-hour format.
The end time applies to all selected days.
10.
Click the
Apply
button.
Your settings are saved.
11.
Select
System
> Timer Schedule > Advanced > Timer Schedule Configuration
.
The Timer Schedule Configuration page displays. The timer schedule that you just added
displays in the Periodic Schedule Table.
Delete a Periodic Schedule for a PoE Timer Schedule
You can delete a periodic schedule entry that you no longer need for a PoE timer schedule.
To delete a periodic schedule for a PoE timer schedule:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
System > Timer Schedule > Advanced > Timer Schedule Configuration
.
The Timer Schedule Configuration page displays.
6.
In the Periodic Schedule Table, select the check box for the periodic schedule that you want
to delete.
7.
Click the
Delete
button.
The period schedule is deleted.