Configure rules for a basic ip acl – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 275
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
275
•
1–99
. Creates a basic IP ACL, which allows you to permit or deny traffic from a
source IP address.
•
100–199
. Creates an extended IP ACL, which allows you to permit or deny specific
types of Layer 3 or Layer 4 traffic from a source IP address to a destination IP
address. This type of ACL provides more granularity and filtering capabilities than the
standard IP ACL.
Each configured ACL displays the following information:
•
Rules
. The number of rules currently configured for the IP ACL.
•
Type
. Identifies the ACL as a basic IP ACL (with an ID from 1 to 99) or extended IP
ACL (with an ID from 100 to 199).
7.
Click the
Add
button.
The IP ACL is added to the switch configuration.
Delete an IP ACL
To delete an IP ACL:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Security > ACL > Advanced > IP ACL
.
The IP ACL Configuration page displays.
6.
Select the check box for the IP ACL.
7.
Click the
Delete
button.
The IP ACL is removed.
Configure Rules for a Basic IP ACL
Use the IP Rules page to define rules for IP-based standard ACLs (basic ACLs). The access
list definition includes rules that specify whether traffic matching the criteria is forwarded
normally or discarded.