NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 23
Smart Managed Pro Switches MS510TX and MS510TXPP
Get Started
User Manual
23
6.
To see a menu that displays statistics and configuration options, right-click a port.
2.5G Ports 5 and 6, Right LEDs
PoE status
(Model MS510TXPP only)
The right LEDs for ports 5 and 6 (mg5 and mg6) indicate the following
status:
• Off
. The port is not delivering PoE.
• Solid green
. The port is delivering PoE.
• Solid yellow
. A PoE fault occurred.
5G Ports 7 and 8, Left LEDs
Link, speed, and activity
The left LEDs for ports 7 and 8 (mg7 and mg8) indicate the following
status:
• Off
. No link is established.
• Solid green
. A valid 2.5 Gbps or 5 Gbps link is established.
• Blinking green
. The port is transmitting or receiving packets at 2.5
Gbps or 5 Gbps.
• Solid yellow
. A valid 100 Mbps or 1000 Mbps link is established.
• Blinking yellow
. The port is transmitting or receiving packets at 100
Mbps or 1000 Mbps.
5G Ports 7 and 8, Right LEDs
PoE status
(Model MS510TXPP only)
The right LEDs for ports 7 and 8 (mg7 and mg8) indicate the following
status:
• Off
. The port is not delivering PoE.
• Solid green
. The port is delivering PoE.
• Solid yellow
. A PoE fault occurred.
10G Port 9, LED
Link, speed, and activity
The LED for port 9 (xmg9) indicates the following status:
• Off
. No link is established.
• Solid green
. A valid 10 Gbps link is established.
• Blinking green
. The port is transmitting or receiving packets at
10
Gbps.
• Solid yellow
. A valid 5 Gbps, 2.5 Gbps, 1000 Mbps, or 100 Mbps
link is established.
• Blinking yellow
. The port is transmitting or receiving packets at
5 Gbps, 2.5 Gbps, 1000 Mbps, or 100 Mbps
SFP+ Port 10, LEDs
Link, speed, and activity
The LEDs for port 10 (xg10, the SFP+ port) indicate the following status:
• Off
. No SFP+ module link is established on the fiber port.
• Left LED solid green
. The fiber port established a valid 10 Gbps
link.
• Left LED blinking green
. The fiber port is transmitting or receiving
packets at 10 Gbps.
• Right LED solid yellow
. The fiber port established a valid 1 Gbps
link.
• Right LED blinking yellow
. The fiber port is transmitting or receiving
packets at 1 Gbps
Table 3. LEDs on the Device View page (continued)
LED
Description