Local information – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 72
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information
User Manual
72
8.
Click the
Apply
button.
Your settings are saved.
Local Information
Use the LLDP Local Information page to view the data that each port advertises through
LLDP.
To view local LLDP information:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
System > Advanced > LLDP > Local Information
.
The Device Information page displays. The page also displays the Port Information
section.
The page includes only the interfaces on which LLDP is enabled.
The following table describes the LLDP device information and port summary information.
Field
Description
Device Information
Chassis ID Subtype
The type of information used to identify the switch in the Chassis ID field.
Chassis ID
The hardware platform identifier for the switch.
System Name
The user-configured system name for the switch.
System Description
The switch description, which includes information about the product model
and platform.
System Capabilities
The primary functions that the switch supports.
Interface
The interface associated with the rest of the data in the row.
LLDP Local Information