NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 81
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information
User Manual
81
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
System
> Services > DHCP Snooping > Binding Configuration
.
The Static Binding Configuration page displays. The page also shows the Dynamic
Binding Configuration section.
6.
From the
Interface
menu, select the interface on which the DHCP client is authorized.
7.
In the
MAC Address
field, specify the MAC address for the binding to be added.
This is the key to the binding database.
8.
From the
VLAN ID
menu, select the ID of the VLAN the client is authorized to use.
9.
In the
IP Address
field, specify the IP address of the client.
10.
Click the
Add
button.
The DHCP snooping binding entry is added to the database.
The Dynamic Binding Configuration table shows information about the DHCP bindings that
were learned on each interface on which DHCP snooping is enabled.
Table 19. DHCP Dynamic Configuration information
Field
Description
Interface
The interface on which the DHCP client message was received.
MAC Address
The MAC address associated with the DHCP client that sent the message. This is the
key to the binding database.
VLAN ID
The VLAN ID of the client interface.
IP Address
The IP address assigned to the client by the DHCP server.
Lease Time
The remaining IP address lease time for the client.
The following table describes the dynamic bindings information.