Remove an arp entry from the arp cache – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 171
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Routing
User Manual
171
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Routing
> ARP > Advanced > Global ARP Configuration
.
The Global ARP Configuration page displays.
6.
In the
Age Time (secs)
field, enter the time, in seconds, that a dynamic ARP entry remains
in the ARP table before aging out.
The range is 15 to 21600 seconds. The default value is 1200 seconds.
7.
Click the
Apply
button.
Your settings are saved.
Remove an ARP Entry From the ARP Cache
You can remove all or specific entries from the ARP table.
To remove entries from the ARP table:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Routing
> ARP > Advanced > ARP Entry Management
.
The ARP Entry Management page displays.
6.
From the
Remove From Table
menu, select the type of ARP entry to be deleted:
•
All Dynamic Entries
•
All Static Entries
•
All Entries